Gold Tip Arrow Chart |
Shaft Selection Chart
Shaft Size | 3555 | 5575 | 7595 |
Draw Wt. lbs. | 24" | 25" | 26" | 27" | 28" | 29" | 30" | 31" | 32" | 33" |
35 to 40 | ||||||||||
41 to 45 | ||||||||||
46 to 50 | ||||||||||
51 to 55 | ||||||||||
56 to 60 | ||||||||||
61 to 65 | ||||||||||
66 to 70 | ||||||||||
71 to 75 | ||||||||||
76 to 80 | ||||||||||
81 to 85 | ||||||||||
86 to 90 | ||||||||||
91 to 95 |
Graphite XT - Specifications
Model Number | Concentricity (%) | Straightness (Inches) | Draw wt. (lbs.) | Weight (gr/in) | Lock Nock (size) | Insert (size) | Outside Diameter |
3555 | less than 0.5% | +/- 0.002 | 35 to 55 | 7.3 | LN246 | INS246 | .290 |
5575 | less than 0.5% | +/- 0.002 | 55 to 75 | 8.2 | LN246 | INS246 | .295 |
7595 | less than 0.5% | +/- 0.002 | 75 to 95 | 8.9 | LN246 | INS246 | .300 |
Material - Specifications
Material | Tensile Strength | Blowout Strength | Stiffness (modulus) | Weight (lbs/in3) |
Graphite XT | 320,000 psi | 60.2 lbs. | 19 Msi* | 0.058** |
7500 Alum. | 95,000 psi | 55.4 lbs. | 11 Msi | 0.101 |
Carbon Fiber | 270,000 psi | 10.8 lbs. | 18 Msi | 0.060 |
Lock Nock/Insert - Specifications
Material | Weight | Colors | |
Lock Nock | Polycarbonate | 14 grains | Flo. Green, Orange, Red, White, Black |
Point Insert | Aluminum | 12 grains | n/a |
Note: Recommended glue for inserts: 1-hour two part epoxy. Graphite XT represents the strongest, stiffest and lightest material. Selection chart is based on a 100 grain tip.